How to expand the transmit frequencies on a Kenwood TM-D710GE (aka Mars cap)

The Kenwood TM-D710GE originally comes with a large receive range of 118 MHz all the way up to 1300 MHz. (Interrupted from 524 MHz to 800 MHz) It has a small transmit range of 144 to 146 MHz and 430 to 440 MHz.
To expand the transmit range from 136 to 174 MHz and from 400 to 470 MHz you will have to turn off the radio, then open the set with 8 screws and remove the resistor labeled W601.
With the front of the radio facing you it is on the lower left hand corner. Closest to the control head on the left hand side of the radio.

The green wire in older radios

In the popular youtube videos doing this mod on older versions of the radio this is a green wire.

After removing the resistor and turning the transceiver on it will reset to the default settings so it is a good idea to save all settings and memory banks beforehand to a file. This can be done with both MCP-6A or CHIRP.

Here are some more hints and tricks concerning this radio.